How Breaking Point calculates
Breaking Point is a game on a real calculation core. Your bridge is a truss: all members are pin-jointed and carry tension or compression only. The bridge has two identical trusses; each carries half the deck and half the convoy. Member forces come from the direct stiffness method, the same method as in our frame solver. A test keeps the game's results equal to that solver.
Every member is checked the way a structural engineer does it. In tension: force divided by area times yield strength. In compression: with the buckling factor χ to EN 1993-1-1 §6.3.1, buckling curve c for a cold-formed hollow section, with the member length as buckling length. The steel is S355. That is why a long, slender member buckles at a fraction of what it can take in tension.
The game uses no load factors: it looks for the point where the steel really gives up. An engineer first multiplies the loads by 1.35 and 1.5 and so keeps a reserve. A bridge at 99 % here would be rejected by an engineer.
When a member fails it is removed and the game recalculates. If the rest still carries, the convoy drives on. If what remains is a mechanism, the bridge collapses. The picture of that collapse is an animation; the verdict always comes from the calculation.
The sections
Six cold-formed square hollow sections (EN 10219), the same sizes as in our solvers, and two solid tie rods. A hollow section is 14 m long at most, a tie rod 80 m. The buckling value is for a member of 6 m: a tie rod buckles almost at once, so it carries tension only.
| Section | Weight | Area | Tension | Buckling at 6 m |
|---|
What Breaking Point does not do
Bending in members and deck, the connections, fatigue, wind, dynamic effects and lateral stability are not considered. The pylon, the pier and the abutments are given and not checked; the cross bracing in the picture is not part of the calculation. A real structure needs a calculation that a structural engineer checks and approves.
From game to real calculation
The solvers Breaking Point is calibrated against are free on this site (in Dutch). Analyse your own frame or truss, in 2D or 3D, with the Eurocode combinations and checks.
Need a calculation for a renovation or a new building in the Netherlands? A structural engineer checks and approves every calculation.
Regel mijn berekening